Wainscoting Height In Bathroom

Remodeled Bath University Heights The Beard Group

Wainscoting Height In Bathroom

Posted by Buche Angela on Tuesday, 19 May, 2020 20:59:04

The rule of thumb is that the wainscoting panels are usually 1/3 the height of the wall. Our starting default height for the wainscoting panels is 34 1/2" (without the top cap lip). Look around the room for obstacles that might influence the desired wainscoting height such as wall switch plates. It is usually best to stay just below the switch

Bathroom wainscoting can be very practical, especially if you have a freestanding tub and you want to protect the walls from water damage. Further more, the wainscoting can continue on the adjacent walls and it can frame all sorts of features, including benches and vanities.

Will the wainscoting hold up in a bathroom given moisture? - Donna H., Boston Dear Donna: Most wainscot paneling runs about 36 inches from the floor up, but it's not unheard of to go as high as 48 to 52 inches.

It suggests adding a top and bottom railing cap to the beadboard. A standard railing cap height is 6 inches, so the total height of the beadboard wainscoting and railing is 39 inches. Elite Trimworks recommends a similar total beadboard finished height of 38 inches.

Subway tile wainscoting is both decoratively charming and functional. In joining tile to tile (wainscot to floor), a tight, water-sealed seam is created, important in bathroom applications. Tile wainscoting may also act as a backsplash or tub surround in these spaces.

The width and height of each panel must match perfectly in order to fit together in unison. For instance, if you desire to have a Nantucket beadboard bathroom design, the panel height can be anywhere from 32 to 44 inches. A non-traditional height would be 60 inches